STEP BY STEP PROCEDUAL BREAKDOWN FOR AN
AVERAGE KITCHEN VALUED AT 30,000 TO $35,000
This breakdown, generally speaking for me, on the average is a good
representation of my product cost,
parts and labor for each procedure.
will have slight variances but for the most part this is it.
If there is any individual price change to this menu below, it will be
addressed with you prior to any agreement. This way you can view each
procedure as a numbered product and purchase
only what you need. (see examples bottom of page)
1) Initial meet and greet at your location to discuss
all your possibilities. 1a) Any
product number purchase qualifies you for over the phone assistance, tutoring or
any aspect of
these procedures.__no charge.
Accurately measure the total kitchen environment. Place those measurements into
a professional kitchen design program so as to produce for you multiple renderings
your finished project for your review. If LDE does the complete full kitchen this fee
will be refunded
off the balance.____$500.
order of doors, drawer fronts, drawer boxes, soft-close drawer rails and door
hinges, lazy susan hinges, standard molding group,
screws of various sizes delivered
to your door, inventoried, measurements verified, check for shipping damages.
(Parts Only)__5000. to $8000.
3a) Installation of all new components of the above
product number (3)__1000. to $2000.
4) Countertops granite or quartz, installed (Parts
and Labor)(Not Island Cabinet)_5000. to $8000.
5) Center Island Cabinet, 4doors, 2 or 4 drawer
boxes, 4 interior drawer pull-outs,
soft-close rails and door hinges with
granite or quartz countertop__$8000.
5a) All components of the above product number (5)
Removal of old doors, drawers, mouldings and anything that won't
with the finished kitchen placed in an area for customer to trash
(extensive tear outs priced separately)__$200.
7) Prepare existing cabinets for new laminate
re-facing, sand cabinets, resecure
and repair cab's if needed, labor, labor___$3000.
laminate or real wood veneer or painted veneer applied to already
prepared cabinets(Parts and Labor)____$3000.
of all kitchen refuge from property, old doors, drawers, countertops
10) Lead Safe Renovator procedure priced per job_____________________???.
Accessory add-on's such as soft-close trash pull-outs,
large upright pantry
away toe-kick pull-outs, tile back splash, tile floor, microwave,
hood vents, sinks and more all priced separately__???
1 This customer chose to do all the work himself. He will paint
cabinet boxes, remove the old doors, drawers and hardware, take the same to the dump.
Install all the new products and keep his exsiting countertop. Product number 1a for him
will be appreciated.
Exsample 2 This customer chose to have Leslie Design Engineering do most of the work.
The design and measure fee(Product#2) is refunded. Customer will be using his own
Soft close trash pullout dual bucket(parts
Knobs and pulls for doors and drawers(parts and labor)_____
Customers new microwave installed(labor only)____________100.
Product(#2) $500. refund. Total (parts and labor________$20050.
Exsample 3 This customer chose to have Leslie Design Engineering do the work. The
design and measure fee (product#2) is refunded.
The wholesale cost of the countertops
given to Leslie Design
is always passed on directly to the customer when purchased with
a full kitchen job.The customer also chose to use his own plumber and electrician on this
project. This job also involved some lead
paint interaction. Leslie Design Engineering is
by the state and federally by the EPA to do this work safely and on this job
at no additional charge for the lead paint renovation work.
Soft close trash pullout dual
bucket(parts and labor)__________________$500.
Large upright 70" pullout
w/5 ajustable baskets(parts and labor)________1500.
High performance hood
vent 800cfm ducted to outside (parts and labor)__1500.
Knobs and pulls for
doors and drawers(parts and labor)_______________ 250.
refund Total part and labor____________________$36450.
The main reason I produced this menu is to show you what is involved
with the average
kitchen install parts and labor. The components
I use are of the highest quality and durability.
Go to my
Links page on the navigation bar and see some of these products. I do not do
plumbing or electrical. Re-facing will save you money if your cabinet structure is sound and
in 90% of the 650 kitchen jobs i've done, they are worth saving. I also offer complete
replacement at whatever level quality you demand. All of your questions can be answered
with product number 1 at no charge.